IPS PP Ezyliner Standard Grade

IPS PP Ezyliner Standard Grade


Ezyliner is a solid Plastic Co-Polymer Wall Lining renowned for its extreme toughness and durability. Ezyliner is a solid material through its entire thickness, is flexible, has no surface coatings to chip off, is easy to clean, does not absorb water and is easy to install.


• Gloss finish

• No water absorption

• Available in white but a range of colours available


• Farming

Farmers find Ezyliner is ideal for milk rooms, vat stands, bail wall and wet wall areas. Easily cleaned, Ezyliner stays looking attractive despite occasional rough treatment. Ezyliner takes the knocks and bangs that could crack and shatter other linings.

• Butcher Outlets

No longer confined to the cutting rooms out the back – butchers now use Ezyliner to line retail areas because it stays looking smooth and clean. Just throw warm water over it and scrub it with a Ministry of Agriculture and Fisheries approved cleaning agent, and it will clean up looking like new.

• Fish Chillers

Fish processors, initially used Ezyliner to reline entire fish chillers because it did not become brittle and crack with the constant changes in temperature. However, due to its resilient properties, Ezyliner is now being used throughout the entire plant.

• Abattoirs

Plants processing beef, mutton pork and lamb use Ezyliner extensively on both the walls and the ceilings.

It’s easy to see why Ezyliner is ideal for food and hygiene areas. The cost of Ezyliner is competitive with laminated products.

Many Reasons to Specify Ezyliner

Suitable areas of use include – amenity blocks, bakeries, butcher shops, cold stores, fishmongers, bacon curing, food processing and packaging, commercial kitchens, pharmaceutical manufacturers, veterinary surgeries, cowsheds etc. Ezyliner should not be used for areas outside the temperature constraints of the product.

• Hygienic

Ezyliner is impermeable, non-porous and does not encourage bacterial growth. It is easy to clean and will withstand repeated washing with a steam hose.

• Non Toxic

The materials used to produce Ezyliner are completely nontoxic and will not taint food or beverages. The material has FDA, DGA Food Approval.

• Durable

The unique formulation of Ezyliner provides an extremely hardwearing surface which will not deteriorate; chip or flake, even from impact at low temperatures. Ezyliner has a durable life of at least 15 years when installed in an interior application as per the Ezyliner installation brochure. Most installations incorporating Ezyliner would fall inside the BIA 15 year durability provision, being systems having a moderate ease of access, but difficult to replace.

• Thermal Properties

Ezyliner has a 1.8 x 10 4 co-efficient of linear expansion. This means that, for every 10 degrees celsius rise or fall in temperature, it will expand or contract by approximately 1.8mm per metre. Ezyliner fasteners and joiners are designed to accommodate this thermal movement. NOTE: Care must be taken when installing Ezyliner at a temperature other than its working temperature. Ezyliner has a working temperature of –10 to 50 degrees celsius with a vicat softening point of between 1400C and 1500C. Ezyliner may be steam cleaned.

• UV Stability

Ezyliner is designed for interior use, however it has been formulated to withstand minimum UV radiation and may be used where subject to UV exposure. Prolonged exposure to UV will, however, result in a reduction in the life of the product.

• Storage

Ezyliner should always be stored away from direct sunlight on a flat surface and never on its edge. Lift rather than drag sheets off the stack to avoid damage to the surface. The Ezyliner jointer should be stored free of distortion at normal room temperature.


Ezyliner is manufactured in a standard colour of white. Other colours may be available subject to minimum quantities. Ezyliner is manufactured in 3 and 4.75mm thickness, in standard 2400 x 1200mm sheets. Other sizes may be available, again subject to minimum quantities. The Ezyliner jointer is manufactured in a standard length of 2400 +5mm.