|
MAKROCLEAR® FR is an extruded polycarbonate sheet with excellent fire behavior. It is the material of choice for applications with high demands of performance and safety. It contains the latest halogen free* flame retardant additives
(* according to DIN VDE 472 part 815). Sawing and forming can be performed by using the same methods as for standard polycarbonate.
Qualities:
• Excellent fire behavior classification
• VO (UL 94) from 3.05 mm
• Superior impact strength
• Lightweight compared to glass
• Easily screen-printed
• Can easily be formed into gentle curves
• Excellent thermoforming properties
• Usable over a wide temperature range
Application areas:
MAKROCLEAR® FR is specified for applications where extremely low smoke emission during fire is a requirement, for example in covers for electronic equipment, at gas stations etc.
|
|
| |
The above information is based upon experience and given in good faith. Due to many factors, which are outside our knowledge and control, no warranty is given or is to be implied with respect to such information.
Arla sheets are produced from resins that are certified according to UL 94. Furthermore, several products have been tested according DIN 4102 (class B1 and B2), DIN 5510 (class S3, SR1 and SR 2, ST1 and ST2), BS 476 part 7 (class 1Y), NF P 92-501 (M2), CSE/75/A (class 1), CSE/RF/3/77 (class 1), UNE 23.727-90 (Class M.4). A list of products that have been tested and their respective classification is presented on www.arlaplast.se. If information regarding classifications according to other standards is needed, it is often possible to retrieve information from our raw material suppliers.
Please contact our technical support. |
|
|
|
|
